Easy product returns
You can return the product without providing a reason within 14 days.
This 3D Root background comes in 1 section and will fit Aqua Oak 110 aquarium.
The line of cut is straight, but when you join both sections with tabs provided, it will be less visible. You can use other ornaments or plants to cover the joint. You don't have to silicone the background inside, as it sinks.
The space from glass to front of background in some points is between 2 to 3 inches. Background is made from poly-resin, which is safe for all aquatic life. Our backgrounds sink, it's not a foam.
Installation is very easy, you only have to slide it inside your aquarium and background will stay in place. The background is not flexible, you can't bend it, but you may trim it by using angled grinder, hacksaw, dremmel
Here's the video showing the Juwel Rio 125 with our 3D Basic background
We can do any size of background with drilled vents in desired placed. For custom built background please contact us or visit www.backgroundquote.co.uk
PLEASE NOTE: main picture is only a sample image of this product. Item which You will receive may not be identical to the picture. Color may vary, can be slightly lighter or darker. It's hand painted background and every item is unique.
- Background Sections:1 section
- Background size:97x45cm
- Thickness of background:2-4.5 inch
- Aquarium Model:Aqua Oak 110
- Aquarium type:Discus, Tropical
|Size||will fit aquarium||will fit aquarium size inches|
How to measure your aquarium before ordering a 3D background?
Measure your aquarium inside, not outside. Get a measure tape and measure your tank inside from corner to corner, and from bottom up to the top edge of tank. If you have a support brace across your aquarium measure from bottom up to the brace bar. The background has to fit under the brace. Please bear in mind that our backgrounds are not flexible, so you can't bend them.
Leave 1 cm gap between the glass and the background, decrease background width by total of 2 cm and height by 2 cm, so you will have enough room to fit the background inside your tank. On the side edges of the background we fix a greyish foam which will fill the gap between the background and the glass.