JUWEL Vision 260 3D rock background 117x54cm 2 sections
- Background will not fit if you want to keep Juwel internal filter in the corner. Replace the Juwel filter with external filter.
This rock background comes in 2 sections (2 halves), because of the cross bar in the Juwel aquariums. If you have original Juwel internal filter in the corner, you should remove it if you want to install 3D background. We recommend any good external filter, you can hide the inlet pipes and outlet pipes behind the background.
The line of cut is straight, but when you join both sections with tabs provided, it will be less visible. You can use other ornaments or plants to cover the joint. You don't have to silicone the background inside, as it sinks.
The space from glass to front of background in some points is between 2 to 3 inches. Background is made from poly-resin, which is safe for all aquatic life. Our backgrounds sink, it's not a foam.
Installation is very easy, you only have to slide it inside your aquarium and background will stay in place. The background is not flexible, you can't bend it, but you may trim it by using angled grinder, hacksaw, dremmel
We can do any size of 3D background with drilled vents in the desired place.
PLEASE NOTE: the main picture is only a sample image of this product. The item which You will receive may not be identical to the picture. Colour may vary, can be slightly lighter or darker. It's hand-painted background and every item is unique.
In order to get a proper 3d Background quote please measure your tank inside, NOT outside.
You have to measure the width (leave 1cm gap each side to allow some room for sliding the background in) and height. If you have a support brace in the middle of your tank, measure the height from bottom of your tank up to the support brace. The background has to fit under the brace. If you have 1 support brace at the top, it means that the background has to be cut into 2 sections. If you have 2 support braces the background has to be cut into 3 sections. Please remember, that our backgrounds are not flexible, you can't bend them.
|Size||Width x Height in cm||Sections|
|Juwel Vision 260||117x54||2|
3d Backgrounds designed for Juwel Aquariums are produced after placing the order, which means that the lead time is between 2-3 weeks.
IMPORTANT: All the backgrounds in this section of the website will fit Juwel Aquariums WITHOUT the original Juwel filter which sits in the corner. The background will cover the whole tank back wall and you should use any external filter.
If you want to keep the original Juwel Filter, we can produce a shorter background which will fit between the filter box and the other corner of the aquarium. Please visit www.backgroundquote.co.uk for automated quote for any size backing.